During the cruise the turbulence probe MSS050 was used for microstructure measurements. The profiler is produced by Sea and Sun Technology GmbH in co-operation with ISW Wassermesstechnik. The probe was equipped with 2 velocity microstructure shear sensors, a microstructure temperature sensor, standard CTD sensors for precision measurements, a vibration control sensor, a two component tilt sensor, a fluorescence sensor and surface detection sensor (SD) to indicate the water surface hit at rising measurements. The sampling rate for all sensors is 1024 samples per second, the resolution 16 bit. During the MSS measurements, the ship was moving with speed approx. 0.5-1.0 knots with respect to the water against the wind. In order to take into account the intermittent nature of marine turbulence, repeated MSS measurements were carried out in bursts of typically 10 profiles per station. The measurement interval was approximately 7 (10) min for a profile to 140 (200) dbar. During JC87 cruise 8 series of turbulence measurements were conducted. Fluorescence data was obtained on the 5 of them.