-
Anelasticity in ODS MA956 steel during unloading in cyclic creep straining
Oxide dispersion-strengthened steels are still being regarded as suitable choices for components in advanced nuclear power plants. It is important, then, to study how permanent... -
Influence of component geometry and scan strategy on the residual stress in S...
Unlike casting, Selective Laser Melting (SLM) powder bed system can be applied to build near-netshape components with complex geometries in a short lead time. Recently, SLM... -
Measuring strains in geologically important hydrous minerals
We request 4 days of beam-time on ENGIN-X to measure the elastic behaviour of polycrystalline samples of gypsum, antigorite, and talc as a function of uniaxial load. All three... -
Stroboscopic Neutron and X-ray mapping of strain fields in dynamically loaded...
Bearings are essential components in many types of machinery, working to reduce energy losses. Over the last century improved analytical models were developed for predicting the... -
Measurement of Residual Stresses in Side-Punched Single Edge Notched Bend Spe...
Residual stresses have been generated, mechanically, in single edge notched bend specimens by side-punching ahead of sharp notches. Given that this is a novel method of... -
The Effect of Residual Stress Distribution on Creep Cracking Behaviour of Wel...
Fracture prediction of structures manufactured from high strength engineering steels is a high priority in key industries. In this work residual stress (RS) effects on creep... -
In-situ Observation of Strain Evolution of Hydrogen Pre-charge Super Duplex S...
Mechanical properties of metals can be largely degraded by the present of solute hydrogen, and this phenomenon is referred as hydrogen embrittlement. This phenomenon has been... -
Towards reliable residual stress characterization in dissimilar metal welds
The proposed experiment is a continuation of the initial studies carried out on SALSA instrument (ILL, Grenoble) as part of the collaborative PhD project jointly funded by the... -
The effect of manufacturing conditions on residual stress in polycrystalline ...
Polycrystalline diamond cutters are ultra-hard tools used for oil and gas drilling. They are produced by sintering diamond particles at High Pressure (5.5+ GPa) and High... -
Influence of multiaxial cyclic loading on residual stress stability in high-s...
In welded joints subjected to multiaxial fatigue, it is of interest to determine both the time to crack initiation and propagation to understand what controls fatigue life of... -
Residual stresses in laser welded benchmark specimens to validate a new plast...
A novel analytical approach has been developed to assess the plasticity induced error in residual stress (RS) distributions measured by the contour method (CM) for which... -
The lattice parameter displacements in kamacite and taenite phases in metalli...
The bulk of metal meteorites consists of the Fe,Ni-alloys kamacite [α-(Fe,Ni), bcc structure] and taenite [γ-(Ni,Fe), fcc structure]. The chemical composition is... -
Residual Stress Measurement by Neutron Diffraction on Aluminium Matrix Compos...
Aluminium Matrix Composite (AMC) material systems offer unique combination of material and mechanical properties as compared to conventional monolithic materials with... -
Residual Stress Mapping of Friction Stir Welded 6063 Aluminum Pipe Butt Joint
The joining of aluminum is commonly performed by arc welding technique which easily induces severe weld defects and distortion. The friction stir welding (FSW) technique offers... -
The influence of welding process on deformation and fracture behaviour of off...
The proposal aims to investigate the influence of welding process on deformation and fracture behaviour of S355ML steel, which is of the type used for offshore renewable energy... -
Validation of the asymmetric cut in the contour method.
The Contour method is a powerful residual stress measurement method, that is still under development. A limitation of the technique is that the component must be cut into two... -
Residual Stresses in Tekken Weld Specimen
Approved proposal under the ICRD Scheme Proposal ICRD0017 -
The influence of residual stress on fatigue crack growth and structural integ...
In order to characterise the fatigue crack growth (FCG) behaviour of the welded components used in offshore wind turbine monopiles, a number of tests have been performed on... -
Effect of the welding speed on the residual stress distribution in the AA7050...
Stationary-shoulder friction stir welding (SSFSW) is a relatively new solid-state joining technique which particularly attractive for alloys which are difficult to join via...